See information below regarding the ALTA product code you are interested
in.
| P19 |
 |
Solvent-based primer designed for machine application
on abrasive-cleaned or wire brushed pipe surfaces.
|
| P 27 |
|
Solvent-based primer designed for brush, roller or spray application
to mechanically cleaned reconditioned pipe surfaces.
|
| 108 |
|
Anti-corrosion layer designed for machine or hand operated
machine application under various climatic conditions for new
pipelines and reconditioning of existing pipelines. Excellent
adhesion and conformability to the primed pipe surface with
proven long-term in-ground performance.
|
| 122-30 U.V. |
|
Cold-applied, high U.V. tape system specifically for above-ground
protection on cleaned pipe surfaces. The system is formulated
to resist degradation caused by exposure to UV rays and various
outdoor conditions. Can be used as corrosion protective layer
or outerwrap.
|
| 1823-32 |
|
Cold-applied, 3 ply joint coating tape system for in-field
or plant application on mechanically cleaned and primed pipe.
Provides a totally bonded coating between pipe, innerwrap and
outerwrap.
|
| 205 |
|
Mechanical protection layer for use with all of the Alta anti-corrosion
mainline and joint wrap coating products. Designed for machine
and hand application.
|
| 206 |
|
Extra heavy duty mechanical protection layer. Suitable for
over-the-ditch construction or for factory coating.
|
| 300-40 |
|
Heavy duty joint wrap tape for hand wrapping in applications
where high shear properties are required. Designed without release
liner for less waste and ease of use.
|
| 320-40 |
|
Cold-applied tape system with a high tack adhesive, used as
a patch/repair system and as the primary corrosion protection
system on field joints, fittings, and specialty piping.
|
| 400-12 |
|
General utility tape for hand application on small diameter
pipe, joints, and fittings.
|
| 500-13 |
|
General utility tape for hand application on small diameter
pipe, joints, and fittings.
|
| MN Mastic |
|
100% solid mastic designed as a self-adhering filler material
prior to over coating with Alta joint coating tape systems.
|
