OUR BRANDS
We are distributors of the following brands:
Other Equipment
PDFs
CRC EVANS Construction Equipment
CRC-Evans provides a range of pipeline equipment and technology for onshore and offshore pipeline construction. CRC-Evans equipment has a reputation for quality which comes from the ongoing research and development undertaken to keep pace with the increasing demands of the pipeline industry.
Pipe Bending Machines
The "Centurian" Benders offered by CRC-Evans is the next generation of the state-of-the-art bending machines. Re-engineered stronger frame andgydraulic system offers faster bending with increased capacity.
Bending Sets and Dies
A Bending Set and a Bending Die are required for each diameter of pipe and produce maximum accuracy, and are available bare or with linings to accommodate all current comercial coatings that will withstand bending.
Internal Pneumatic Line-up Clamp
The IPLC provides internal line-up of two pipes prior to welding, built to withstand pipeline spread operations. A self-propelled IPLC travels through the pipe to the next joint under its own power, a non self-propelled IPLC is pulled to the next joint manually.
Manual Internal Line-up Clamp
The Manual Internal Line-up Clamp offers quick line-up for continuous welding of pipe. Full-round stringer beads eliminate costly 'tacking' and weld defects, rings expand with sufficient power from jack-type mechanism to give adequate pipe alignment.
Pneumatic Pipe Bending Mandrel
The Pneumatic Wedge Type Pipe Bending Mandrel was designed for heavy wall & high yield grade pipe.The Mandrel is positioned & controlled manually within the pipe by a reach rod & is particularly successful in providing a smooth bend with no "out-of-round".
Roli™ Cradle
The CRC-Evans Roli™ Cradle is the ideal cradle for all line travel operations, eliminating damage caused by steel wheel cradles & distributing pressure evenly eliminating "egging" of the pipe, the wrap around design ensures that the pipe "centers" in the cradle.
TruBend™
TruBend™ is a wireless digital angle measurement device for attachment to any CRC-Evans Bending Machine. It provides a continuous readout of the achieved bend angle during bending operations & displays angles of both ends & the net bend in the pipe.
